Waterproofing 1C

Waterproofing 1C – Ready to use a coating to waterproof substrates

The complete fast drying one coat is ready to use the tanking system for internal wet areas.

Providing complete waterproofing protection of substrates prior to fixing wall and floor tiles.
Suitable for use in internal domestic and commercial situations.
All corner/edges must be reinforced with BAL SCRIM TAPE is required:
• Where movement may occur such as around drainage channels, junctions between floor and wall, preventing water penetration through suspended floors.
• For showers/ wet rooms/ kitchens/ laundry/utility room, and around drainage/ upstands.
Restrictions: NOT suitable for External use, total immersion, the barrier to prevent water ingress from background/base (e.g. DPM).

PRODUCT INFORMATION:
Composition: Ready to use polymer system.
Colours: Grey.
Type: Internal use only.
Pack sizes: 5 litres

KEY FEATURES:
– Brush, roller or trowel applied.
– No mixing is required and can be used again.
– Can be used without priming.
– Ability for one coat application.
– Tile after 2 hours.
– Static Cracks and board joints bridged up to 3mm without tape or matting on the floor.
– Total waterproofing protection for internal locations.

DOWNLOAD TIP SHEET: BAL Waterproof 1C